Engraved electrical panel labels

Panel IDs, disconnect labels and "fed from" tags, engraved to the size and wording you choose, ready to pick up in Ellensburg.

Start from a panel ID label and change the wording to yours.

Make a panel label

What we make

Panel identification: panel name, voltage and system, and where it's fed from. For example PANEL L1 · 120/208V 3PH 4W · FED FROM MDP.
Disconnect labels for rooftop units, pumps, EV chargers, water heaters and anything else with a disconnect.
Source-of-supply labels for panels and switchboards fed from somewhere else in the building.
Breaker, feeder and circuit tags in small sizes, down to 1/2" tall.
Available fault current (AIC) labels: outside dwelling units, NEC 110.24 requires service equipment to be marked with the maximum available fault current and the date it was calculated. Make an AIC label.
Main service disconnect labels (start one).

Why engraved instead of a label maker

NEC 110.22(A) requires each disconnecting means to be legibly marked to show its purpose, and outside one- and two-family dwellings NEC 408.4(B) requires feeder-supplied panels to be marked with where their power comes from. Engraved plastic stays legible: it doesn't fade, peel or smear the way printed tape and marker do in a hot electrical room.

Sizes and prices

Size (H × L)	Typical use	Each	Each, 10+
1" × 3"	Breaker or small disconnect	$4.96	$3.76
1.5" × 4"	Disconnect, one or two lines	$6.82	$5.47
2" × 4"	Panel ID, three lines	$8.06	$6.61
3" × 5"	Switchboard or MDP	$12.40	$10.60

Plus a $13.00 order fee per order and 8.6% Ellensburg sales tax. Any custom size from 1/2" up to 12" × 24" works; the builder prices it as you type.

Colors

White on black, black on white, white on red, black on yellow, white on blue, white on green and white on orange. Indoor plastic for electrical rooms; UV-stable outdoor plastic or metal for exterior gear.

What to send

The exact wording, one line per row, spelled the way you want it engraved.
The size, in inches or millimeters, and the letter height if your spec calls for one.
Color, material, and adhesive back or screw holes.

We engrave exactly what you send, so check your wording against your drawings and your inspector's requirements before you pay.